Arthur_Martin AKM3400CAX Bedienungsanleitung PDF herunterladen (Seite 20)

Removing the shelf supports

To clean the oven, remove the shelf

supports.

CAUTION! Be careful when

you remove the shelf supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

2

1

Install the removed accessories in the

opposite sequence.

Catalytic cleaning

CAUTION! Do not clean the

catalytic surface with oven

sprays, abrasive cleaning

agents, soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of the

catalytic surface have no effect

on catalytic properties.

WARNING! Keep children

away when you clean the oven

at a high temperature. The

oven surface becomes very hot

and there is a risk of burns.

Before you turn on the catalytic

cleaning remove all the

accessories from the oven.

The cavity with a catalytic coating is self-

cleaning. It absorbs fat.

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the function .

3. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

4. When the oven is cool, clean it with a

soft and wet sponge.

Cleaning the oven door

The oven door has three glass panels.You

can remove the oven door and the internal

glass panels to clean them.

The oven door can close if you

try to remove the glass panels

before you remove the oven

door.

CAUTION! Do not use the

appliance without the glass

panels.

1. Open the door fully and hold the two

door hinges.

2. Lift and turn the levers on the two

hinges.

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare