Arthur_Martin AGG9537K Bedienungsanleitung PDF herunterladen (Seite 13)

WARNING! Do not use knives,

scrapers or similar instruments

to clean the surface of the

glass or the rims of the burners

and the frame (if applicable).

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are inserted in the recesses

of the enamelled plates.

Removing and assembling pan

supports

After cleaning of the hob, make sure that

pan supports are in a correct position. In

order to place a pan support properly.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and a

non-abrasive detergent. After cleaning,

wipe the hob dry with a soft cloth.

• To clean the enamelled parts, caps and

crowns, wash them with warm soapy

water and dry them carefully before you

put them back on.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

of the gas supply pipe and the pressure

adjuster, if fitted.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare