Arthur_Martin AKG911A3OW Bedienungsanleitung PDF herunterladen (Seite 21)

7. Clean the oven door with water and

soap. Clean inner side of the door. Dry

the oven door carefully.

When the cleaning is completed, install

the glass panels and the oven door. To

install the oven door, do the above steps

in the opposite sequence.

Replacing the lamp

WARNING! Risk of electric

shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

3. Put a cloth on the bottom of the cavity.

The back lamp

1. Turn the lamp glass cover to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark gen‐

erator.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec‐

tion diagram.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Keine Kommentare

Arthur_Martin AKG911A3OW Bedienungsanleitung Seite 21